The Security menu provides features to make the network used by project Deka Prime. After you have successfully logged in to Cloudka Portal Services, click the Security menu on the Deka Prime module. There are three subsections in this section:
16.5.1 Create Firewall
Here are the steps to create a rule on Firewall:
- On the Security menu click Details.
Image 16.47 Create Firewall (a)
- Select the Firewall tab and click Create Rules.
Image 16.48 Create Firewall (b)
- The Add Rule window displays indicating that you cannot cancel the action because the created rule will be permanently stored, click the Confirm key to continue with the process.
Image 16.49 Create Firewall (c)
- A Successfully updated Rule notification displays which means that the firewall rule was successfully added and will be located on the 2nd line of the last line from the bottom.
Image 16.50 Create Firewall (d)
16.5.2 Update Firewall
Here are the steps to upgrade the firewall configuration:
- On the Security menu click Details.
Image 16.51 Update Firewall (a)
- Select the Firewall tab and select the firewall data to update by clicking the Update icon.
Image 16.52 Update Firewall (b)
- Pada halaman Edit Firewall Rules dapat mengubah Name, Action, menDestination, Source, Service. Setelah memperbaharui firewall klik tombol Save
Image 16.53 Update Firewall (c)
- Show notification “Firewall has successfully updated!”
Image 16.54 Update Firewall (d)
16.5.3 Delete Firewall
Here are the steps to remove the firewall configuration:
- On the Security menu click Details.
Image 16.55 Delete Firewall (a)
- Select the Firewall tab and select the firewall data to update by clicking the Delete icon.
Image 16.56 Delete Firewall (b)
- Show notification “Firewall has successfully updated!”
Image 16.57 Delete Firewall (c)
16.5.4 Add DNAT
Here are the steps to add DNAT on the NAT tab.
- On the Security menu click Details.
Image 16.58 Add DNAT (a)
- Select the NAT tab and click the "+ DNAT Rule" button.
Image 16.59 Add DNAT (b)
- Fill in Applied On, Original IP/Range, Protocol, Translated IP/Range, and Description click the Confirm button to save the DNAT settings.
Image 16.60 Add DNAT (c)
Image 16.61 Add DNAT (d)
- “NAT has successfully updated!” notifications are displayed.
16.5.5 Add SNAT
Here are the steps to add SNAT to the NAT tab.
- On the Security menu click Details.
Image 16.62 Add SNAT (a)
- Select the NAT tab and click the "+ SNAT Rule" button.
Image 16.63 Add SNAT (b)
- Fill in Applied On, Original IP/Range, Protocol, Translated IP/Range, and Description click the Confirm button to save SNAT settings.
Image 16.64 Add SNAT (c)
Image 16.65 Add SNAT (c)
- “NAT has successfully updated!” notifications are displayed.
16.5.6 Edit DNAT/SNAT
Here are the steps to upgrade SNAT/DNAT on NAT:
- On the Security menu click Details.
Image 16.66 Edit DNAT/SNAT (a)
- Select the NAT tab, select the DNS/SNAT data to update and click the “edit” button.
Image 16.67 Edit DNAT/SNAT (b)
- The Edit/DNAT SNAT Rule window displays. Changeable data is Applied On, Original IP/Range, Protocol, Translated IP/Range, and Description click the Confirm button to save the changes.
Image 16.68 Edit DNAT/SNAT (c)
Image 16.69 Edit DNAT/SNAT (d)
- Successfully updated NAT Rule notifications are displayed.
16.5.7 Delete SNAT/DNAT
Here are the steps to remove the SNAT/DNAT configuration on NAT:
- On the Security menu click Details.
Image 16.67 Delete NAT (a)
- Select the NAT tab and select the firewall data to delete and click the Delete icon.
Image 16.68 Delete NAT (b)
- Click Confirm.
Image 16.69 Delete NAT (c)
- Successfully updated NAT Rule notifications are displayed.
16.5.3 Routing
On the Routing tab you can add static routes, modify static routes, and delete created static routes.
16.5.8 Add Static Routes
Here are the steps to add a static route on the Routing tab:
- On the Security menu click Details.
Image 16.70 Add Static Routes (a)
- Select the Routing tab click the Add icon.
Image 16.71 Add Static Routes (b)
- Enter Network, Next Hop, MTU, Admin Distance, Interface, and Description click Confirm to continue with the process.
Image 16.72 Add Static Routes (c)
- “Static Route has successfully created!” notifications and static routes appear in the Static Routes table.
Image 16.73 Add Static Routes (d)
16.5.9 Edit Static Routes
You can change Network, Next Hop, MTU, Admin Distance, Interface, and Description. Here are the steps to change the static route data:
- On the Security menu click Details.
Image 16.74 Edit Static Routes (a)
- Select the Routing tab and select the static route data to update and click the Update icon.
Image 16.75 Edit Static Routes (b)
- When you finish updating the static route click the Confirm button.
Image 16.76 Edit Static Routes (c)
- “Successfully update static routes” notifications are displayed.
16.5.10 Delete Routes
You can remove a static route created by following these steps:
- On the Security menu click Details.
Image 16.77 Delete Routes (a)
- Select the Routing tab and select the static route data to delete and click the Delete" icon.
Image 16.78 Delete Routes (b)
- The Delete Routes window displays click the Confirm button to continue with the removal process.
Image 16.79 Delete Routes (c)
- “Successfully update static routes” notifications are displayed.